Towing - Nilfisk-Advance City Ranger 2250 Operator's Manual

1.12 Towing

Towing
When towing City Ranger 2250, attach the tow line to the
pull hook on the left side of the machine. (Picture 1)
Towing valve
The towing valve under the machine is used to move the
machine manually. (Picture 2)
To tow: Switch off engine.
Turn valve until the lever is in the horizontal
position.
Tow the machine.
When you have finished towing, turn the valve until the
lever is in the vertical position.
The towing valve must be closed. If not, the machine will
not run.
Warning
!
Do not start the machine until the towing
valve has been closed.
Attention
!
When towing, there is no servo system.
Operator's Manual City Ranger 2250
General information
1
Pull hook
2
Towing valve
23