Before You Start The Installation; Equipment Specifications - Avaya S8710 Installing And Configuring

1 Introduction

Equipment specifications

Before you start the installation

The pre-installation team should have done the following tasks. If they were not all done, do not continue
with the installation.
•
Verify that the open, customer-supplied, EIA-310D (or equivalent) standard 19-inch (48-
centimeter) equipment racks are properly installed and solidly secured. Make sure that the screws
that come with the racks are there. The S8700 Media Server requires a 2-post rack. The S8710
Media Server requires a 4-post rack. If using a rack cabinet, make sure it has adequate ventilation.
•
Verify that the rail kit to support the S8710 Media Server are available for installation.
•
Verify that the rail kits, required to support the very heavy UPSs, are installed on the rack or
available for installation. For information on installing the rails, refer to the documentation that
comes with the rail kits.
•
Verify that the equipment rack(s) is(are) grounded per local code. See Job Aid: Approved Grounds
(555-245-772).
•
Verify that the customer provides AC power to the rack from a nonswitched outlet.
•
Verify that cabling for the TN2312BP Internet Protocol Server Interface (IPSI) circuit packs is
labeled and run from the control hardware rack to the port networks or that appropriate
connectivity is provided.
•
Verify that you have all the equipment on site. See
for the list of required hardware.
Equipment specifications
The media server control network components consist of two media servers, one or two Ethernet
switch(es), and two UPSs. See
Table 1: Control network components specifications
Dimensions
Component English (in.)
Media Server
S8700 3.5h x 17d x 17w
S8710 3.4h x 26d x 17.5w
Ethernet Switch:
P133G2/P134G2 3.5h x 14d x 19w
P333T/334T 3.5h x 18d x 19w
UPS:
700 VA 3.5h x 19d x 17w
1500 VA 3.5h x 24d x 17w
The internal room temperature must not exceed 104° F (40° C).
18
Table 1, Control network components specifications,
Metric (cm)
9h x 43d x 43w
8.6h x 66d x 45w
9h x 35d x 48w
9h x 45d x 48w
9h x 48d x 43w
9h x 30d x 43w
Installing and Configuring the Avaya S8700 or S8710 Media Server
Table 3, List of required hardware,
Us (height in rack) Weight (lb/kg)
2 25/11
2 60/27
2 11,13/5,6
2 16.5/7.5
2 34/15
2 50/23
on page 20
on page 18.
June 2004