Resetting Interface Module (Profinet Io) To Factory Settings - Siemens SIMATIC S7-1500 System Manual

Maintenance
13.5 Reset to factory settings
13.5.2

Resetting interface module (PROFINET IO) to factory settings

Function
The interface module can be reset to its factory state using "Reset to factory settings".
M ethod of resetting an interface module to factory s ettings
● Via STEP 7 (online via PROFINET IO)
Procedure using STEP 7
To reset an interface module to factory settings via STEP 7, follow these steps:
Make sure that an online connection to the interface module exists.
1. Open the online and diagnostics view of the interface module.
2. In the "Functions" folder, select the "Reset to factory settings" group.
3. Click the "Reset" button.
4. Click "OK" in response to the confirmation prompts.
Result: The interface module then performs a "Reset to factory settings".
Result after resetting to factory settings
Table 13- 3
Properties
Parameter
IP address
Device name
MAC address
I&M data
Firmware version
* Can be selected as of STEP 7 V14: "Retain maintenance data"/"Delete maintenance data"
Not e
Failure of downstream stations is possible
Stations downstream from the interface module can fail when the factory settings are
restored on an interface module.
222
Properties of the interface module when shipped
Va lue
Default setting
Not present
Not present
Present
Identification data (I&M0) present
Maintenance data (I&M1, 2, 3) reset*
Present
Automation system
System Manual, 09/2016, A5E03461182-AD