Siemens SIMATIC S7-1500 System Manual page 185

Id e n ti fi ca ti o n d a ta
IM_SWRevision_Internal_
•
Change
IM_REVISION_COUNTER
IM_PROFILE_ID
IM_PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_Version_Major
•
IM_Version_Minor
•
IM_SUPPORTED
Ma intenance data 1: (Record index AFF1
IM_TAG_FUNCTION
IM_TAG_LOCATION
Ma intenance data 2: (Record index AFF2
IM_DATE
Ma intenance data 3: (Record index AFF3
IM_DESCRIPTOR
Reading I&M records with record 255 (distributed c onfiguration via PROFIBUS)
Use Read dat a record ("RDREC" instruction) to access specific identification data.
The modules support standardized access to identification data using DR 255 (index 65000
to 65003). For additional information on the DR 255 data structure, refer to the specifications
of the Profile Guidelines Part 1: Identification & Maintenance Functions - Order no.: 3.502,
Version 1.2, October 2009.
Automation system
System Manual, 09/2016, A5E03461182-AD
Acce ss
(1 byte) 0000
H
read (2 bytes) 0000
H
read (2 bytes) 0000
H
read (2 bytes) 0001
H
0003
H
read 0101
H
(1 byte)
(1 byte)
read (2 bytes) 000E
H
)
H
read/write (32 -
bytes)
read/write (22 -
bytes)
)
H
read/write (16 YYYY-MM-DD HH:MM
bytes)
)
H
read/write (54 -
bytes)
10.8 Identification and maintenance data
Exa m p l e
- 00FF
H
Provides information about parameter
changes on the module
(not used)
Generic Device
CPU
I/O modules
Provides information on the ID data ver-
sion
(0101
provides information about the available
identification and maintenance data
(I&M1 to I&M3)
Enter an identifier for the module here,
that is unique plant-wide.
Enter the installation location of the
module here.
Enter the installation date of the module
here.
Enter a comment about the module here.
Commissioning
Exp l a n a ti o n
= Version 1.1)
H
185