Maintenance
13.2 Replacement of I/O modules and front connectors
3. Additionally for F-modules:
– Carefully remove the electronic coding element from the front connector. Take care
– Insert the removed electronic coding element into the new front connector.
Figure 13-8
4. Insert the new front connector into the existing I/O module, until your hear it click into
place.
5. Wire the new front connector.
210
not to damage the coding element.
Removing the electronic coding element from the front connector and inserting it into
a new front connector
Automation system
System Manual, 09/2016, A5E03461182-AD