Optional Marking - Siemens SIMATIC S7-1500 System Manual

5.11.2

Optional marking

Introduction
On the I/O modules there is free space on the front cover, that permits an additional labeling
or marking on the part of the customer.
Optional marking
The front cover provides about 30 mm x 10 mm of space in its lower part for an optional
identifier label.
①
Figure 5-20
Automation system
System Manual, 09/2016, A5E03461182-AD
Free space for example for equipment identifiers
Optional marking
5.11 Marking the I/O modules
Wiring
99