Standards And Approvals - Siemens SIMATIC S7-1500 System Manual

Technical specifications

15.1 Standards and Approvals

15.1 Standards and Approvals
Currently valid markings and authorizations
Not e
Det ails on t he components of the S 7-1500 automation system/ET 200MP distributed
I/ O s ystem
The currently valid markings and approvals are printed on the components of the S7-1500
automation system/ET 200MP distributed I/O system.
Safety information
P ersonal injury and damage t o property may occur
In hazardous areas, injury to persons and material damage may occur if you disconnect
plug-in connections during operation of an S7-1500 automation system/ET 200MP
distributed I/O system.
Always switch off the power to the S7-1500 automation system/ET 200MP distributed
I/O system when disconnecting plug-in connections in hazardous atmospheres.
E x plosion hazard
If you replace components, compliance with Class I, DIV 2 may become invalid.
Deployment requirements
This device is only suitable for use in Class I, Div. 2, Group A, B, C, D, or in non-hazardous
areas.
234
WA RNING
WA RNING
WA RNING
Automation system
System Manual, 09/2016, A5E03461182-AD