Powering The Magnum 6Kl Managed Edge Switch - GarrettCom magnum 6kl Installation And User Manual

Magnum 6KL Managed Edge Switch Installation and User Guide
3.4

Powering the Magnum 6KL Managed Edge Switch

The DC internal power supply supports installation environments where the
DC voltage is from 10 to 300 volts depending on the model selected. The power
consumption will range from about 10 up to 15 watts, depending on the port quantity and
types in the configuration.. When connecting the Ethernet cabling, there is no need to
power down the unit. Individual cable segments can be connected or disconnected
without concern for power-related problems or damage to the unit.
Power input options are available to suit the 6KL Switches to special high-
availability communications and/or heavy industrial-grade applications, including:
* 12VDC, -48VDC, 24VDC, 125VDC and 250VDC with single DC input,
* 12VDC, -48VDC, 24VDC, 125VDC and 250VDC with dual-source DC input
* AC input with internal power supply
(see Section 1.2, for Ordering Information)
www GarrettCom com . .
Fig 3.4a
Single DC power input
Power input connection made with 4-position
terminal block, +, -, NC, NC (Not connected)
Fig 3.4b
Dual DC power input
Power input connection made with 4-position
terminal block, A+,A -, B-, B+
(note: 125 and 250VDC power input made by a
fixed, IEC-320 male, cord exiting the 6KL unit)
Fig 3.4c
AC power input
Power input connection made with IEC-320 type,
male recessed
24
11/09