Table of Contents
Advertisement
Magnum 6KL Managed Edge Switch Installation and User Guide
The Multimode LC ports support fiber optic cable distances up to the IEEE
standard 100Mbps distance limits, typically 2km at full-duplex.
The 6KL4-2MLC2RJ copper ports support Ethernet twisted pair segments of
any standard length. It is equipped with a two-port RJ-45 connector, and offers 10/100
full / half-duplex auto-negotiating capability on each port. The RJ-45 connector is
shielded to minimize emissions and will allow both unshielded twisted pair (UTP) and
shielded twisted pair (STP) cable connections. When installed in a Magnum 6KL Series
Managed Switch, the copper ports support the standard distance of 100m on each port.
(see Sections 5.1.2 and 5.1.3 for more details)
5.1.6
6KL4-2SLC2RJ, 6KL4-2SLCL2RJ (Slot C)
2 x Singlemode LC / 2 x RJ45
The 6KL4-2SLC2RJ 4-port Fiber module provides two 100Mb Singlemode
LC Fiber ports, supporting distances up to 20km and two 10/100Mb switched RJ45 ports.
This module provides the same functions as the Multimode version (see Section 5.1.2
and 5.1.3 for more details).
The 6KL4-2SLCL2RJ 4-port Fiber module provides two 100Mb Singlemode
LC Fiber ports, supporting distances up to 40km and two 10/100Mb switched RJ45 ports.
This module provides the same functions as the Multimode version (see Section 5.1.2
and 5.1.3 for more details).
5.1.7
6KL4-4MTRJ, 4 x Multimode MTRJ (Slot C)
The 6KL4-4MTRJ 4-port Fiber module provides four 100Mb Multimode
MTRJ Fiber ports.
The 6KL4-4MTRJ fiber port is a Small Form Factor (SFF) MTRJ Multimode
connector. The MTRJ's small size and ease of connection make it a good choice for
100Mbps "fiber-to-the-desktop" Ethernet connectivity. When installed in a Magnum
6KL Series Switch, it supports fiber optic cable distances up to the IEEE-standard
100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.
The cable end is a "plug-in" connector with both fiber strands terminated in
one housing that cannot be improperly inserted. Each port has a Link/Activity (L/A)
LED indicating proper connectivity (Link) with the remote device when lit and blinking
(Activity), indicating packets being received.
www GarrettCom com
.
.
35
11/09
Hide quick links:
Advertisement
Table of Contents
