6Kl-2Gcu, 2 X Gigabit Rj45 (Slot B); 6Kl-2Gsfp, 2 X Gigabit Sfp (Slot B) - GarrettCom magnum 6kl Installation And User Manual

Magnum 6KL Managed Edge Switch Installation and User Guide
5.1.21

6KL-2GCU, 2 x Gigabit RJ45 (Slot B)

The 6KL-2GCU 2-port Copper Gigabit module provides two fixed
10/100/1000Mb RJ45 ports in slot B.
There are two LEDs provided for each Gigabit port. Each Copper Gigabit port
has LEDs that indicate L/A (Link/Activity), 10, 100 and 1000Mbps speed (set to AUTO
by default).
5.1.22

6KL-2GSFP, 2 x Gigabit SFP (Slot B)

The 6KL-2GSFP 2-port Fiber Gigabit module provides two SFP open
transceiver locations . Transceivers are available with both multi-mode 850nm (550m),
1310nm (2km), single-mode 1310nm (10km and 25km) and single-mode 1550nm (40km
and 70km) fiber options. (see Sec. 1.2 of this manual for available part numbers)
The 1000Mb Gigabit SFP fiber-port modules on the Magnum 6KL are
normally set (factory default) to operate at AUTO mode for best fiber distance and
performance. Each port has a Link/Activity (L/A) LED indicating proper connectivity
(Link) with the remote device when lit and blinking (Activity), indicating packets being
received.
www GarrettCom com . .
41
11/09