Engine Reinstallation - Suzuki GSF600Y 2000 Service Manual

3-8 ENGINE

ENGINE REINSTALLATION

Reinstall the engine in the reverse order of engine removal.
• Insert the two long bolts from left side. Install the brackets, spacer, bolts and nuts properly, as shown in the
following illustration.
NOTE:
The engine mounting nuts are self-locking. Once the nuts have been removed, they are no longer of any use.
Be sure to use new nuts and tighten them to the specified torque.
"
N . m kgf . m
ITEM
1, 2
75 7.5
3, 4
55 5.5
LENGTH
Bolt 1
Bolt 2
Bolt 3
Bolt 4
Spacer RH A
lb-ft
54.0
40.0
180 mm (7.1 in)
130 mm (5.1 in)
55 mm (2.2 in)
55 mm (2.2 in)
27 mm (1.1 in)
NOTE:
When reusing the removed engine mounting bolts ( 2 and
4 ), apply a small quantity of the THREAD LOCK "1342"
to their threads.
# 99000-32050: THREAD LOCK "1342"
Left-side
Point 1
Point 3
Bushing
Point 4
Point 2
Other engine mounting bolts and frame down
tube mounting bolts.
" 32 N . m (3.2 kgf . m, 23.0 lb-ft)
Right-side
Spacer A
Bushing