5-28
CHASSIS
REMOVAL
• Support the motorcycle with center stand.
• Remove the cotter pin 1. (For E-03, 28, 33)
• Loosen the axle nut 2.
• Remove the rear axle nut.
• Remove the rear axle and disengage the drive chain from the
rear sprocket.
• Remove the rear wheel.
#
Do not operate the brake pedal during or after rear wheel
removal.
• Draw out the rear sprocket mounting drum from the rear wheel.
NOTE:
Before separating the rear sprocket mounting drum, slightly loosen
the rear sprocket nuts.
• Remove the rear sprocket 3 from the rear sprocket mounting
drum.
• Remove the spacer 4.
• Remove the retainer 5.