Suzuki GSF600Y 2000 Service Manual page 65

NOTE:
When installing the gearshift cam stopper plate 1 , align the pin
groove A with the pin B as shown.
• Install the gearshift cam 2 and its related parts.
3 Gearshift cam stopper
4 Circlip
5 Spring
6 Circlip
$
Always use new circlips (4 4 4 4 4 and 6 6 6 6 6 ).
• Position the gearshift cam in the neutral position as shown. This
will allow the gearshift forks and transmission gears to be in-
stalled easily.
• Install the gearshift forks into the crankcase in the correct posi-
tion and direction.
7 For the 6th (top) driven gear
8 For the 3rd/4th drive gear
9 For the 5th driven gear
ENGINE 3-27