Suzuki GSF600Y 2000 Service Manual page 85

• Before installing the cylinder head cover gasket onto the cylin-
der head cover, apply the recommended bond to the groove in
the cylinder head cover.
• Apply the recommended bond to the four camshaft end caps of
the gasket as shown.
* 99000-31140: SUZUKI BOND "1207B"
• Place the cylinder head cover onto the cylinder head.
• Install the four gaskets onto each cylinder head cover union
bolt 1 and tighten them to the specified torque.
$
Replace the gaskets with new ones to prevent oil leak-
age.
" Cylinder head cover union bolt 1:
• Install the eight gaskets in the correct locations.
• Tighten the cylinder head cover bolts 2 to the specified torque.
$
Replace the gaskets with new ones to prevent oil leak-
age.
" Cylinder head cover bolt 2:
• Install all of the spark plugs. (!2-6)
16 N . m (1.6 kgf . m, 11.5 lb-ft)
14 N . m (1.4 kgf . m, 10.0 lb-ft)
ENGINE 3-47