Configuring Redundant Recording And Capture - HIKVISION DS-9608NI-I8 User Manual

5.8 Configuring Redundant Recording and Capture

Purpose:
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data
safety and reliability. .
Step 1 Enter HDD Information interface.
Menu> HDD
Step 2 Select the HDD and click
1) Set the HDD property to Redundancy.
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to Chapter 11.4.1 Setting HDD
Property. There should be at least another HDD which is in Read/Write status.
Step 3 Enter the Record setting interface.
Menu> Record> Parameters
1) Select Record tab.
Network Video Recorder User Manual
Figure 5-24 HDD General
to enter the Local HDD Settings interface.
Figure 5-25 HDD General-Editing
111