Calling Patterns; Customizing Linear Scan Limit - HIKVISION DS-9608NI-I8 User Manual

Step 3 Click the Start button and click corresponding buttons in the control panel to move the PTZ
camera, and click the Stop button to stop it.
The movement of the PTZ is recorded as the pattern.

4.2.6 Calling Patterns

Purpose:
Follow the procedure to move the PTZ camera according to the predefined patterns.
Step 1 Click the button PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
setting bar, or select the PTZ option in the right-click menu to show the PTZ control panel.
Step 2 Click the
Step 3 Click the Call Pattern button to call it.
Step 4 Click the Stop Pattern button to stop calling it.

4.2.7 Customizing Linear Scan Limit

Purpose:
The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined
range.
This function is supported by some certain models.
Step 1 Enter the PTZ Control interface.
Menu > Camera > PTZ
Network Video Recorder User Manual
button to show the general settings of the PTZ control.
Figure 4-9 PTZ Panel - General
87
in the quick