Chapter 12 Network Settings; Configuring General Settings - HIKVISION DS-9608NI-I8 User Manual

12.1 Configuring General Settings

Purpose:
Network settings must be properly configured before you operate NVR over network.
Step 1 Enter the Network Settings interface.
Menu >Configuration>Network
Step 2 Select the General tab.
Step 3 In the General Settings interface, you can configure the following settings: Working Mode,
NIC Type, IPv4 Address, IPv4 Gateway, MTU, DNS DHCP and DNS Server.
The valid value range of MTU is 500 - 9676.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an
IP address and other network settings from that server.
Network Video Recorder User Manual

Chapter 12 Network Settings

Figure 12-1 Network Settings Interface
195