Setting Hdd Property To Read-Only - HIKVISION DS-9608NI-I8 User Manual

Step 5 Protect the record files.
1)
Find the record files you want to protect, and then click the
that the file is locked.
The record files of which the recording is still not completed cannot be locked.
2) Click to change it to

5.10.2 Setting HDD Property to Read-only

Step 1 Enter HDD setting interface.
Menu> HDD
Step 2 Click to edit the HDD you want to protect.
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter
Managing HDD Group.
Step 3 Set the HDD property to Read-only.
Network Video Recorder User Manual
to unlock the file and the file is not protected.
Figure 5-33 Unlocking Attention
Figure 5-34 HDD General
Figure 5-35 HDD General- Editing
icon which will turn to , indicating
116