HIKVISION DS-9608NI-I8 User Manual page 24

No. Name
ALARM
READY
STATUS
HDD
Status
1
Indicators
MODEM
Tx/Rx
GUARD
2 IR Receiver
3 DVD-R/W
4 Alphanumeric Buttons
5 USB Interfaces
Network Video Recorder User Manual
Table 1-2 Description of Control Panel Buttons
Function Description
Turns red when a sensor alarm is detected.
Turs blue when the device is functioning
properly.
Turns blue when device is controlled by an IR
remote.
Turns red when controlled by a keyboard and
purple when IR remote and keyboard is used at
the same time.
Flickers red when data is being read from or
written to HDD.
Reserved for future usage.
Flickers blue when network connection is
functioning properly.
Turns blue when the device is in armed status; at
this time, an alarm is enabled when an event is
detected.
Turns off when the device is unarmed. The
arm/disarm status can be changed by pressing
and holding on the ESC button for more than 3
seconds in live view mode.
Receiver for IR remote
Slot for DVD-R/W.
Switches to the corresponding channel in live
view or PTZ control mode.
Inputs numbers and characters in edit mode.
Switches between different channels in playback
mode.
Turns blue when the corresponding channel is
recording; turns red when the channel is in
network transmission status; turns pink when the
channel is recording and transmitting.
Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk
23