HIKVISION DS-9608NI-I8 User Manual page 99

M&A: recording triggered by motion detection and alarm.
POS: recording triggered by POS and alarm. (Supported by I series NVR only)
You can delete the set schedule by clicking the None icon.
2) Choose the camera you want to configure.
3) Select the check box after the Enable Schedule item.
4) Click Edit button or click on the color icon under the edit button and draw the schedule
line on the panel.
Edit the schedule:
The all-day continuous recording is configured for the device by factory default.
In the message box, you can choose the day to which you want to set schedule.
I.
You can click the
II. To schedule an all-day recording, check the checkbox after the All Day item.
III. To arrange other schedule, set the Start/End time for each period.
Up to 8 periods can be configured for each day. And the time periods can't be overlapped each
other.
Network Video Recorder User Manual
Figure 5-8 Recording Schedule Interface
button to set the accurate time of the schedule.
Figure 5-9 Edit Schedule
98