Using The Unlock Pattern For Login - HIKVISION DS-9608NI-I8 User Manual

If Admin's password is modified, the following menu pops up. Optionally, click the Yes button to
duplicate the password to IP cameras that are connected with default protocol.

2.1.3 Using the Unlock Pattern for Login

For the Admin user, you can configure the unlock pattern for device login.
Configuring the Unlock Pattern
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when
the pattern is done.
Network Video Recorder User Manual
Figure 2-5 Attention Interface
Figure 2-6 Set Unlock Pattern
45