Figure 3-4 Run Configuration Example - Main Tab - Keithley SourceMeter 2611 User Manual

3-10 Test Script Processor Interaction
Figure 3-4
Run configuration example - Main tab shown
2. In the Configurations area of the Run box, select the KIGeneral script. The
launch configuration tabs for that script will appear in the Run box.
3. Presently, the Name of the script is KIGeneral. You should change the name
so the script is not confused with the factory script of the same name that
resides in the Series 2600. Change the script Name to KIGeneralUser and
click the Apply button.
2600S-900-01 Rev. A / May 2006
NOTE Figure 3-4
launch is configured.
Return to
Series 2600 System SourceMeters User's Manual
and 7. show how the Run box will look after the
Name KIGeneral
Configurations
In this section:
KIGeneralUser