Series 2600 System SourceMeters User's Manual
How do I use TSB to make measurements?
Reference
The following procedure uses the TSB Instrument Console to send commands to
source voltage and measure current on Channel A using a 10kΩ resistor as the
DUT. The complete command sequence as it would appear in the console win-
dow is shown in
Figure 2-6
Source-measure command sequence in console window (2601/2602 version shown)
Refer to "Remote source-measure procedure" in Sections 4 and 12
of the Series 2600 Reference Manual for details on instrument com-
mands.
Figure
2-6, along with instrument responses.
Return to
In this Section:
Remote Operation
2600S-900-01 Rev. A / May 2006
2-9