Cardinal Detecto 758C Owner's Manual page 29

SETUP AND CALIBRATION, CONT.
HH= (HOURS)
With display showing hh=, press PRINT/ENTER key to show current setting. If value
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise, using numeric keys,
enter a new value and then press PRINT/ENTER key to save it. Allowable values are: 0
through 23.
NOTE: Time is entered in a 24-hour format. When entering times after noon (12:00 PM),
you must add 12 to time. For example, 3:00 PM would be entered as 15.
dd= (DAY)
With display showing dd=, press PRINT/ENTER key to show current setting. If value
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise, using numeric keys,
enter a new value and then press PRINT/ENTER key to save it. Allowable values are: 1
through 31.
nn= (MONTH)
With display showing nn=, press PRINT/ENTER key to show current setting. If value
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise, using numeric keys,
enter a new value and then press PRINT/ENTER key to save it. Allowable values are: 1
through 12.
yy= (YEAR)
With display showing yy=, press PRINT/ENTER key to show current setting. If value
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise, using numeric keys,
enter a new value and then press PRINT/ENTER key to save it. Allowable values are: 00
through 99.
iD= (ID NUMBER FEATURE)
This setting determines whether the indicator allows an ID number to be entered prior to
beginning the weighing operation. This applies to both Basic Operation and with the BMI
feature enabled.
With display showing id=, press PRINT/ENTER key to show current setting. If setting
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise use numeric keys
0/NO or 1/YES and enter a new setting. Press PRINT/ENTER key to save it.
0 = ID Disabled
iDBAR= (ID SCANNER)
This setting determines whether the indicator allows a scanner to be used to input an ID
number to be entered prior to beginning the weighing operation. This applies to both Basic
Operation and with the BMI feature enabled.
With display showing idbar=, press PRINT/ENTER key to show current setting. If setting
displayed is acceptable, press PRINT/ENTER key to save it. Otherwise use numeric keys
0/NO or 1/YES and enter a new setting. Press PRINT/ENTER key to save it.
0 = No Scanner
IMPORTANT! If the Transaction Storage Mode is set to ID Storage Enabled (type= 1)
the idbar= prompt will not be displayed.
1 = ID Enabled
1 = Yes Scanner
8555-M210-O1 Rev R  758C Owner's
25