Equipment And Options (Extract) - Binder vdl 23 Operating Manual

All technical data is specified for unloaded chambers with standard equipment (with aluminum racks) at
an ambient temperature of +22 °C +/- 3 °C / 71.6 °F ± 5.4 °F and a power supply voltage fluctuation of
±10. Technical data is determined in accordance to BINDER Factory Standard Part 1:2015 following DIN
12880:2007.
All indications are average values, typical for chambers produced in series. We reserve the right
to change technical specifications at any time.

19.3 Equipment and options (extract)

To operate the chamber, use only original BINDER accessories or accessories / components
from third-party suppliers authorized by BINDER. The user is responsible for any risk arising
from using unauthorized accessories.
Regular equipment
Microprocessor program controller RD3 with LED display
Safety device class 2 according to DIN 12880:2007
RS 422 printer and communication interface with adjustable printing intervals
Fine-dosing aeration valve
Inert gas connection with fine-dosing valve
Analog pressure display (manometer)
Pressure switch for heating release (at pressure < 125 ± 25 mbar / 3.69 ±0.74 inHg)
Area for electrical equipment swept with compressed air or inert gas with monitoring of the minimum
supply pressure
Measuring connection (DN 16), rear
Safety glass panel
Intelligent adaptation of the heating power by soft heating-up function (selectable on-off)
Options / accessories
Expansion racks, aluminum or stainless steel 1.4571
FKM door gasket (temperature resistant up to 200 °C / 392°F)
Additional measuring channel for digital object temperature display with flexible Pt 100 temper. sensor
Communication software APT-COM™ for logging and display of temperature data and networking up to
30 chambers with PC
ATEX connection kits for pumps VP4 (MZ2C EX) or VP5 (MD4C EX) with various small flange parts
Measuring access port vacuum 9 poles
Vacuum module with chemical membrane pump VP4 (MZ2C EX) with separator and emission conden-
ser, ready for connection
• Ready to connect: Suction power
• End vacuum
• Electrical connection (50 Hz)
Vacuum module with chemical membrane pump or VP5 (MD4C EX) with separator and emission con-
denser, ready for connection
• Ready to connect: Suction power
• End vacuum
• Electrical connection (50 Hz)
Factory calibration certificate
Extension to factory calibration certificate (additional value)
Calibration certificate of object temperature display
Qualification folder
Evaporating dish with rim, small or large
Stable table on wheels with castors and locking brakes
VDL (E2.1) 05/2016
3
m /h 1.9
mbar / inHg 12 / 0.35
V 230 / 1 N~
3
m /h 3.7
mbar / inHg 3 / 0.09
V 230 / 1 N~
page 93/108