Technical Description; Factory Calibration And Adjustment; Technical Data - Binder vdl 23 Operating Manual

19.

Technical description

19.1 Factory calibration and adjustment

This chamber was calibrated and adjusted in the factory. Calibration and adjustment were performed
using standardized test instructions, according to the QM DIN EN ISO 9001 system applied by BINDER
(certified since December 1996 by TÜV CERT). All test equipment used is subject to the administration of
measurement and test equipment that is also a constituent part of the BINDER QM DIN EN ISO 9001
systems. They are controlled and calibrated to a DKD-Standard at regular intervals.
Factory adjustment was done in the center of the usable volume and under vacuum conditions. The sen-
sor is fixed in the middle of the expansion rack in a way ensuring good thermal conductivity (heat conduc-
tion). Measuring is performed in equilibrated state.
Invalid calibration.
∅ Do NOT change between aluminum and stainless steel racks.
 Use the delivered expansion racks only.

19.2 Technical data

Chamber size
External dimensions
Vacuum oven
Width, net
Height, gross (including feet)
Depth, net
Depth, gross (including door handle,
connections)
Vacuum module (option)
Width, net
Height, net
Depth, net
Depth, gross (including door handle,
connections)
Chamber with optional vacuum module
Width, net
Height, net
Depth, net
Depth, gross (including door handle,
connections)
Wall clearances
Wall clearance, rear (minimum)
Wall clearance, side (minimum)
Internal dimensions
Width
Height
Depth
Interior volume
VDL (E2.1) 05/2016
CAUTION
23
mm / inch 515 / 20.28
mm / inch 655 / 25.79
mm / inch 500 / 19.69
mm / inch 600 / 23.62
mm / inch 515 / 20.28
mm / inch 624 / 24.57
mm / inch 500 / 19.69
mm / inch 600 / 23.62
mm / inch 515 / 20.28
mm / inch 1279 / 50.35 1400 / 55.12 1522 / 59.92
mm / inch 500 / 19.69
mm / inch 600 / 23.62
mm / inch 100 / 3.94
mm / inch 135 / 5.31
mm / inch 285 / 11.22
mm / inch 285 / 11.22
mm / inch 295 / 11.61
l / cu.ft. 23 / 0.8
53 115
634 / 24.96 740 / 29.13
775 / 30.51 900 / 35.43
550 / 21.65 670 / 26.38
650 / 25.59 770 / 30.31
634 / 24.96 740 / 29.13
624 / 24.57 622 / 24.49
550 / 21.65 670 / 26.38
650 / 25.59 770 / 30.31
634 / 24.96 740 / 29.13
550 / 21.65 670 / 26.38
650 / 25.59 770 / 30.31
100 / 3.94 100 / 3.94
135 / 5.31 135 / 5.31
400 / 15.75 506 / 19.92
400 / 15.75 506 / 19.92
340 / 13.38 460 / 18.11
53 / 1.9 115 / 4.1
page 91/108