Deleting A Program Section - Binder vdl 23 Operating Manual

8.4

Deleting a program section

A program section is deleted from the program by setting the section duration to Zero.
Display 1 shows
Display 2 shows PROGRAM EDITOR
Display 1 shows
Display 2 shows UserCod? 0000
Enter the user code using arrow keys
Display 1 shows
Display 2 shows --- : --- PRG.
alternating
CONTINUE X/W
Select the desired program, e.g. P01, using
In the selected program P01 or P02, program sections can be selected:
Display 1 shows
Display 2 shows P01: --- SEC.
alternating
CONTINUE X/W
Select desired section, e.g. S03, using ar-
Display 1 shows
Display 2 shows S03:TEMP 90.0
alternating CONTINUE X/W
Display 1 shows
Display 2 shows S03:TIME 01:00
alternating
CONTINUE X/W
Enter set-point Zero for section length in
hh:mm of S03 using arrow keys
Display 1 shows
Display 2 shows S03:TIME
alternating
DELETE SEC. X/W
VDL (E2.1) 05/2016
Normal display
Press down key
e.g. 0000
Press program key
0000
Automatically forward after 2 sec
e.g. 01
arrow keys
Press key
e.g. 01
row keys
Press key
C
e.g. 90.0
No entry
Press key
e.g. 01.00
e.g. 00.00
00:00
Press key
for 5 sec.
(you are in the program editor)
(enter user code)
e.g. 0001 (basic setting, adjustable in the user
level, chap. 10).
Value is shown in both displays.
(program P01 selected)
(program can be selected)
st
(information: to 1 program section with X/W)
Value is shown in display1.
(actual selection of the section: S01)
(program section can be selected)
(information: set-point entry with X/W)
(omitted if section S01 shall be deleted).
(actual temperature set-point)
(variable: temperature)
(information: continue with X/W)
(actual section length)
(variable: section length)
(information: continue with X/W)
Value is shown in display 2 or in both displays
(display depends on maximum time setting in
the user level chap. 10)
(actual section length)
(variable: section length)
(information: delete section with X/W)
page 58/108