Week Program Editor - Binder vdl 23 Operating Manual

7.

Week program editor

Do not use the week program timer when using explosive substances. Make sure in this case
that the week program timer has been deactivated in the User Level (chap. 10).
Exceeding the ignition temperature of a solvent after the program ends.
Risk of fire and explosion.
Danger of death.
 Prior to using explosive
Level (chap. 10).
The Week program editor allows defining up to 4 shift point for each week day. A shift point defines a
moment and the switching state ON or OFF of the channels that become active in this instance.
Channel function:
• Channel 1 On = Set-point SP2 is equilibrated.
• Channel 1 Off = Set-point SP1 is equilibrated
• Channel 2 = reserve
The week program timer is initially set to inactive (factory setting). Therefore, you need to
activate the week program timer in the user level (chap. 10).
Display 1 shows
Display 2 shows
e.g. 15.05.06 13:52 - -
Display 1 shows
Display 2 shows PROGRAM EDITOR
Display 1 shows
Display 2 shows WEEK PROG. EDITOR
Display 1 shows
Display 2 shows UserCod?
Enter the user code using arrow keys
Display 1 shows
Display 2 shows
Monday
Select the day of the week (Monday up to
VDL (E2.1) 05/2016
substances,
Normal Display
C
e.g. 39.8
(actual date and time, actual state of week program timer
Press down key
e.g. 0000
Press down key
0000 Menu visible only if week program timer is activated
Press program key
0000
0000
Automatically forward after 2 sec
0000
Sunday) with key
DANGER
deactivate the week program timer in the User
(actual temperature value)
channel 1: Off, channel 2: Off)
for 5 sec
(you are in the "program editor")
for 5 sec
in the user level (chap. 10)
(you are in the "week program editor")
(enter the user code, display flashes)
e.g. 0001 (basic setting, adjustable in the
user level, chap. 10).
Value is shown in both displays.
(selection of day of the week)
(actual selection: Monday)
Day of the week is shown in display 2.
page 41/108