Proceeding In Detail - Binder vdl 23 Operating Manual

7.2.3 Proceeding in detail

1. Settings in the user level
• Activating the week program timer
• Checking and, if necessary, setting the real time clock
Display 1 shows
Display 2 shows
e.g. 15.05.06 13:52 - -
Display 1 shows
Display 2 shows PROGRAM EDITOR
Display 1 shows
Display 2 shows
WEEK PROG. EDITOR
Display 1 shows
Display 2 shows USER – LEVEL
Display 1 shows
Display 2 shows UserCod?
Enter the user code using arrow keys
Display 1 shows
Display 2 shows Adress
Press several times key
Display 1 shows
Display 2 shows Prog.Clk
Select "Active" using arrow keys
Display 1 shows
Display 2 shows 12h/24h
Display 1 shows
Display 2 shows Date
VDL (E2.1) 05/2016
Normal Display
C
e.g. 39.8
(actual date and time, actual switching state of week pro-
Press down key
e.g. 0000
Press down key
0000 Menu visible only if week program timer is activated.
Press down key
0000
Press program key
0000
0000
Automatically forward after 2 sec
1
1
0000
Active
Press key
0000
24h
Press key
0000
(Main menu: Setting the date of the real time clock)
Press program key
(actual temperature value)
gram timer channel 1: Off, channel 2: Off)
for 5 sec
(you are in the "program editor")
for 5 sec
(you are in the "week program editor")
for 5 sec
(you are in the user level)
(enter the user code, display flashes)
e.g. 0001 (basic setting, or the valid code in
case it has been previously changed in this
menu).
Value is shown in both displays.
(actual address)
(entry of chamber address)
(actual address: 1)
until Prog.Clk appears:
(Week program timer active or inactive?
(actual setting: Active)
Setting is shown in display 2.
(Display mode 12 hours or 24 hours?
(actual setting: 24h)
page 45/108