Overview Of The Zone Classification Of The Ovens - Binder vdl 23 Operating Manual

Required measures (continuation):
• During the drying process, use only those solvents for which the temperature setting has
been performed.
• In the case of solvent mixtures, use the ignition temperature of the material with the lowest
ignition temperature. For the ignition temperature, refer to the safety specifications of the
solvent.
• Let the oven cool down to ambient temperature before you start a new drying process with
a modified ignition temperature.
2.6

Overview of the zone classification of the ovens

VDL (E2.1) 05/2016
Figure 10: Zone classification VDL 23
page 25/108