Programming Example Of The Week Program Editor; Desired Time Function; Proceeding Overview - Binder vdl 23 Operating Manual

7.2

Programming example of the Week program editor

7.2.1 Desired time function

During the day (12 hours) the oven shall maintain a temperature of +80 °C / 176°F, and during the night
(12 hours) it shall cool down / stop heating (set-point 30 °C / 86°F).
This program shall automatically run during the whole year, i.e. it shall be programmed just once.

7.2.2 Proceeding overview

1. Settings in the User level (see chap. 10)
• Activating the week program timer
• Checking and, if necessary, setting the real time clock
2. Enter the set-points for the week program in "Fixed value entry mode" (see chap. 6)
Set-points for the example program:
SP1 (night / weekend) = 30 °C (Channel 1 ON = Controller adjusts to set-point SP2)
SP2 (day / week) = 80 °C (Channel 1 OFF = Controller adjusts to set-point SP1)
3. Enter the time program to the program editor
Program table for the example program:
Day of the week
Monday S1
S2
Tuesday S1
S2
Wednesday S1
S2
Thursday S1
S2
Friday S1
S2
Saturday S1
S2
Sunday S1
S2
Make sure that no other shift points have been pre programmed. If so, they must be deleted:
Set the time of the respective shift point to " --:-- " using key
VDL (E2.1) 05/2016
Time
hh:mm AM PM
06:00
18:00
06:00
18:00
06:00
18:00
06:00
18:00
06:00
18:00
06:00
18:00
06:00
18:00
Channel 1 (temperature)
ON = SP2 (day)
OFF = SP1 (night)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
.
page 44/108