Table of Contents
Advertisement
2
3
4
5
●
The most distinguish difference between type A and type B dome camera is type B dome camera
has an internal PT (Pan and Tilt) unit, and you can adjust the pan and tilt angle of the camera from
the client software or via web browser.
●
Press RESET about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.
3.8.4 Installation of Type B Dome Camera
Steps:
1. Drill the screw holes and the cable hole according to the supplied drill template.
2. Install the mounting base to the ceiling with the supplied screws.
Installation Manual of Network Camera
SD Card Slot
Video Out Interface
Reset
Power Cable
Drill Tempalte
4
2
3
Screw Hole 3: for
Mounting Base
3
2
4
Figure 3-103 Drill Template
7
8
Audio/Alarm Cables
9
Mounting Base
10
4
2
1
3
Hole A: for cables routed
through the ceiling
3
2
1
4
Code: 190600839
75
Lens
Advertisement
Table of Contents
