Table of Contents
Advertisement
5. Route the cables through the hole in the center of the wall mount.
6. Align the camera with the mounting base.
7. Tighten the set screws to secure the camera with the mounting base.
8. Connect the video output connector to the monitor. Connect the power connector to the power
supply.
9. Adjust the image and focus. Please refer to Image and Focus Adjusting for more detailed
information.
10. Install the inner black liner back to the camera.
11. Align the bubble with the camera.
Installation Manual of Network Camera
Mounting Adapter
Figure 3-76 Secure Mounting Base
Figure 3-77 Secure Camera
61
Mounting Base
Advertisement
Table of Contents
