Table of Contents
Advertisement
Panning
Zoom and Focus Adjusting
Purpose:
You can use the zoom lever and focus lever to adjust the zoom value and focus value.
Steps:
1. Disassemble the camera.
2. View the camera image using the monitor.
3. Loosen the zoom lever and move the lever between T (Tele) and W (Wide) to obtain the
appropriate angle of view.
4. Tighten the zoom lever.
5. Loosen the focus lever and move the screw between F (Far) and N (Near) to obtain the optimum
focus.
6. Tighten the focus lever.
7. Assemble the camera.
Zoom/Focus Lever
Installation Manual of Network Camera
1
2
3
Tilting
Figure 4-32 Lens Adjustment
Figure 4-33 Zoom and Focus Adjustment
131
Rotation
Advertisement
Table of Contents
