Table of Contents
Advertisement
4. Align the screw hole on the camera with the ceiling mount and rotate the camera to get it fixed.
5. Adjust the surveillance angle.
1). Loosen the pan nut to adjust the pan angle [0° -360° ].
2). Loosen the knob on the ceiling mount to adjust the tilt angle [0° -90].
6. Adjust the Lens
1). Connect the VIDEO OUT interface of the camera to the debugging monitor.
2). Adjust the Zoom Lever and Focus Lever to obtain a perfect image on the monitor.
Figure 2-12 Install the Camera to the Mount and Adjust the Angle
Wall Mounting
1. Install the lens (not supplied) to the camera and rotate it to get it tightened.
Installation Manual of Network Camera
Figure 2-11 Install the Lens
16
Knob
Advertisement
Table of Contents
