Table of Contents
Advertisement
Wall mounting:
Steps:
1. Drill the screw holes and the cable hole on the wall according to the supplied drill template.
2. Secure the back box to the wall with the supplied screws.
Position the side cable outlet directly below to prevent moisture from getting inside the camera.
3. Loosen the set screws with the hex key (supplied) to remove the bubble; remove the black liner.
Installation Manual of Network Camera
Drill Template
4
2
1
3
Screw hole 3: for
Mounting Base
3
2
1
4
Figure 3-47 Drilling Template
Figure 3-48 Secure Back box
45
4
2
3
Hole A: for cables routed
through the ceiling
3
2
4
Code:190600839
Advertisement
Table of Contents
