Table of Contents
Advertisement
2. Fix the junction box to the ceiling with the supplied screws.
Please insert the expansion screws first if the camera is mounted to the cement ceiling. And you can
use the self-tapping screws directly if camera is mounted to the wooden ceiling.
3. Route the cables.
4. Align the screw holes on the mounting base to those on the junction box, and tighten the camera
with screws.
Installation Manual of Network Camera
1
Drill Template
1 1:Screw Hole for Mounting Base
1
Figure 4-62 Drill Template
Figure 4-63 Install Junction Box
149
1
Advertisement
Table of Contents
