Installation Of Type Iv & V Camera; Ceiling/Wall Mounting Without Junction Box - HIKVISION TURBO HD DS-2CE57H0T-VPITE User Manual

Figure 2-29 Secure the Junction Box's Body
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover and its body with
three M3 screws.
Figure 2-30 Combine the Junction Box
8. Repeat the step 6 to 8 of 2.3.1 Ceiling/Wall
Mounting without Junction Box to finish the
installation.
2.4 Installation of Type IV & V Camera

2.4.1 Ceiling/Wall Mounting without Junction Box

Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole on the
ceiling/wall.
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3. Attach the bracket to the ceiling/wall and secure the
camera with supplied screws.
Type III
Figure 2-31 Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping

screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are

required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
4. Route the cables through the cable hole, or the side
opening.
5. Connect the cables.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
10
Type IV