Table of Contents
Advertisement
Press RESET about 10s when the camera is powering on or rebooting to restore the default settings,
including the user name, password, IP address, port No., etc.
4.8.2 Installation
Ceiling Mounting
Steps:
1. Drill the screw holes and the cable hole in the ceiling according to the supplied drill template.
2. Fix the camera to the wall with the supplied screws.
Please insert the expansion screws first if the camera is mounted to the cement ceiling. And you
can use the self-tapping screws directly if camera is mounted to the wooden ceiling.
Installation Manual of Network Camera
2
Ceiling Mounting
1
2
1:Screw Hole for
Bracket
1
2
Figure 4-55 Drill Template
144
1
2
2:Screw Hole for
Mounting Base
1
Advertisement
Table of Contents
