Inserting Or Replacing Batteries; Caring For Your System - i-SENS CareSens N Voice Owner's Booklet

Inserting or Replacing Batteries

The CareSens N Voice Meter uses two AAA alkaline batteries.
Before using the meter, check the battery compartment and
insert batteries if empty.
When the symbol appears on the display while the meter
is in use, the batteries should be replaced as soon as possible.
The test results may not be saved if the batteries run out.
Step 1
Make sure the meter is turned off. Press
firmly on the battery cover and slide in the
direction of the arrow. And then swing it
open.
Step 2
Remove the used batteries and insert two
new batteries. Close the battery cover
firmly.
Note: Removing the meter batteries will not affect your
stored results. However you may need to reset your meter
settings. See pages 14-18.
8 www.i-sens.com

Caring for Your System

Use a soft cloth or tissue to wipe the meter exterior.
If necessary, dip the soft cloth or tissue in a small amount of
alcohol.
Do not use organic solvents such as benzene or acetone, or
household and industrial cleaners that may cause irreparable
damage to the meter.
Caution:
• D o not expose the meter to direct sunlight, heat, or excessive
humidity for an extended period of time.
• D o not let dirt, dust, blood, or water enter into the meter's test
strip port.
• D o not drop the meter or submit it to strong shock.
• D o not try to fix or alter the meter in any way.
• S trong electromagnetic radiation may interfere with the
proper operation of this device. Keep the device away from
sources of strong electromagnetic radiation, especially when
measuring your blood glucose.
• S tore all the meter components in the portable case to
prevent loss and help keep the meter clean.
www.i-sens.com 9