Lenovo Flex System x480 X6 Compute Node Installation And Service Manual page 629

• 806f072b-2201ffff : A successful software or firmware change was detected on system
[ComputerSystemElementName].
Successful Software or Firmware Change occured for Bkup Auto Update or ROM Recovery
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0450
User Response
Information only; no action is required.
• 806f0807-0301ffff : [ProcessorElementName] has been Disabled.
A Processor has been Disabled.
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0061
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Information Center for the appropriate user response.
Related links
– "Finding the UEFI diagnostic code" on page 919
• 806f0807-0302ffff : [ProcessorElementName] has been Disabled.
A Processor has been Disabled.
.
Chapter 6 Troubleshooting
619