Lenovo Flex System x480 X6 Compute Node Installation And Service Manual page 997

Before you remove the compute node cover, complete the following steps:
1. Read "Safety" on page v and "Installation guidelines" on page 973.
2. If the compute node is installed in a Lenovo Flex System chassis, remove it (see "Removing a compute
node from a chassis" on page 975 for instructions).
3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with
the bezel pointing toward you.
Statement 12
CAUTION:
The following label indicates a hot surface nearby.
Statement 21
CAUTION:
Hazardous energy is present when the compute node is connected to the power source. Always
replace the compute node cover before installing the compute node.
To remove the compute node cover, complete the following steps:
Step 1. Press on the release button and the push point at the same time and slide the cover toward the
rear of the compute node.
Step 2. Lift the cover away from the compute node.
.
Chapter 7 Installing, removing, and replacing compute node components
987