Table of Contents
Advertisement
push.
Power Button and Indicator
Used to turn the power to place the monitor into standby mode/off.
When the device is off(Red), press the POWER button to turn it on. The power
indicator lights in green.
Flashing green indicates no signal is present (refer to section 3.1.1)
When the device is on, press the POWER button to turn it off. The power
indicator lights in red.
3.2 Rear Panel
For the arrangement of the rear panel of LCM170-E and LCM230-E are the same,
which are different from the LCM156-E's.
The real panel of LCM156-E is shown as below, there are various input and output
interfaces at the rear panel of LCM156-E monitor.
Parts and Functions
Figure 3.2-1 The Rear Panel of LCM156-E Monitor
The interfaces numbered from 1 to 19 in red dotted rectangle are described as
Locations and Function of Parts and Control
13
Advertisement
Table of Contents
