Table of Contents
Advertisement
Menu Operations
Figure 4.1-18 WAVE FORM TYPE
The WFM POSITION item is used to set the position of the wave form/vector display,
and you can select from left bottom or right bottom.
The WFM TRANS item is used to set the transparent of the wave form window and
the vector window.
Use the WFM OVERLIMIT item and the WFM UNDERLIMIT item to set the threshold
for the wave form, and the waveform overstepping WFM OVERLIMIT or WFM
UNDERLIMIT will be painted with distinctive color. The ordinary part is in white, and
the higher part will be in red, and the lower part will be in blue.
Figure 4.1-19 WAVEFORM WITH OVERLIMIT and WFM UNDERLIMIT
The waveform or vector is not available in PBP and NATIVE mode.
39
Advertisement
Table of Contents
