Rear Panel; Arrangement Of Rear Panel - OSEE LCM215-HDR PLUS User Manual

User Preset.
 If the value related to the function button can't be modified, the value
shows in gray.
 For F2/U2~F4/U4 function buttons, the operations are as the same as
F1/U1's.
 Use FUNCTION KEY menu to assign F1~F4. You can assign the function
from among: Camera LUT, Undef, Blue Only, Mono, Marker, Audio Meter,
Time Code, Waveform Type, Vectorscope, Histogram, Scan,
Aspect(Anamorphic), Native, Mute, IMD Display, False Color, Focus
Assist, Peak, Zebra. Refer to "5.1.4 USER CONFIG Menu" for the details.
Power
8.
Used to power on or standby, and the light in the button will indicate the
status of the power. When the monitor is powered on, the light is green,
press the power button and hold 2 seconds, it will enter into standby
mode, the light is red.

4.2 Rear Panel

It will introduce the arrangement and the operations of the interfaces in rear
of the panel in the following.

4.2.1 Arrangement of Rear Panel

For the arrangement of the rear panel of LCM215-HDR+ is shown in
Figure 4.2-1, there are various input and output interfaces at the rear
panel, and build-in speakers in the top.
Locations and Function of Parts and Control
17