Status Information - OSEE LCM156-E User Manual

Default
Items
Value
WFM FORM
OFF
TYPE
WFM
100
OVERLIMIT
WFM
0
UNDERLIMIT
WFM TRANS OPAQUE
WFM
LEFT
POSITION
TIME CODE OFF

STATUS INFORMATION

Set DISPLAYSTATUS DISPLAY item to be ON or Auto, it will display the Status
Information bar at the top left corner of the screen, and it displays the input channel
and signal format.
The status information will be displayed only 15 seconds, then it will be closed
automatically when STATUS INFORMATION item is set to be AUTO.
The Signal Format usually displays as the following situations:

UNKNOWN: appears if an unsupported signal is input.

NO SIGNAL: appears if no signal is detected.
Domain Range

MODE1: WAVE
FORM+ VECT75

MODE2: WAVE
FORM+ VECT100

VECT100

VECT75

WAVE FORM

OFF
50~100
0~50

OPAQUE

TRANS1: the
transparency is 25%

TRANS2: the
transparency is 50%
TRANS3: the
transparency is 75%

LEFT: Left bottom

RIGHT: Right bottom

OFF

D-VITC

LTC

VITC
Source
Signal Format
37
Description
ON.
Switch the display mode among
mode1,
vector75 and wave form.
When the wave form is selected,
it will display the wave form, and
when the vector* is selected, it
will display the color component
of the image signal.
Set the over limit of wave form.
Set the under limit of wave form.
Set the transparency of the wave
form/vector
Set the displayed position for
wave form/vector.
Set whether to display time code,
and set the time code display
mode.
SDI1
1080I59.94
Menu Operations
mode2, vector100,