Menu Operations
Figure 4.1-25 The Position Relationship in PIP Mode
Adjust the display size by CONFIGPIP SIZE item, and there are two kinds of
outlines for the slave picture, as shown in Figure 4.1-26:
Figure 4.1-26 The Size for the Slave Picture
In PIP mode, it displays the waveform/vector or Audio Meter only for the signal source
of the main picture. If the waveform/vector window is displayed, the Audio Meter will
be display only at the top position (Top left or Top right) at the screen.
For example, the WFM displays at the bottom left, and the Audio Meter could be only
displayed at the top position in case of collision, as shown in Figure 4.1-27:
Audio Meter
Main
Picture
Slave
Picture
WFM
(BOT LEFT)
Figure 4.1-27 The Illustrate for WFM and Audio Meter Display
45