Table of Contents
Advertisement
XCM-240 Features
selection list of a screen may not be shown all simultaneously.
Power
11.
Used to power on or standby, and the light in the button will indicate the
status of the power. If the light is green, the monitor is powered on, if the
light is flashing, the monitor is standby.
When the device is standby, cut off the power and restart the device, the
status of the device will be normal but not standby.
4.2 Rear Panel Features
It will introduce the arrangement and the operations of the interfaces in rear of
the panel in the following.
4.2.1 Arrangement of Rear Panel
As shown in Figure 4.2-1, there are various input and output interfaces at
the rear panel of XCM-240 monitor.
Figure 4.2-1 The Rear Panel of XCM-240 Monitor
16
Advertisement
Table of Contents
