Recommended Minimum Chassis Configuration - Cisco ASR 5000 Installation Manual

Recommended Minimum Chassis Configuration

To remove this configuration, set the redundant card back to the default bottom line card:
[local]asr5000(config-card-17)#
Recommended Minimum Chassis Configuration
An absolute minimum chassis configuration consists of one packet processing card and their respective line
cards. However, it is strongly recommended that redundant components be used to minimize the risk of system
outage.
Therefore, the recommended minimum chassis configuration consists of the following:
Table 29: ASR 5000 Recommended Minimum Chassis Configuration
Application Card
SMC
Redundant SMC
PSCA, PSC2, PSC3 or
PPC
Note that for Release 9.0,
only PDSN and HA are
supported on the PPC.
Note that for Release
10.0, only PDSN, HA,
and GGSN are supported
on the PPC.
PSCA, PSC2, PSC3 or
PPC
PSCA, PSC2, PSC3 or
PPC
Redundant PSCA, PSC2,
PSC3 or PPC
* Minimum requirement for hardware + software redundancy or combined services on a single platform.
ASR 5000 Installation Guide
78
redundant with 33
Application Associated Interface Card
Card Slot
Number
8 SPIO
RCC
9 SPIO
RCC
2 FLC2 or QGLC
Redundant FLC2 or QGLC
XGLC
3* None required
4 None required
11 None required
Line Card Installation
Line Card Slot
Number
24
40
25
41
18 and 34
17 and 32
N/A
N/A
N/A