Asr 5000 Installation Guide - Cisco ASR 5000 Installation Manual

Quad Gigabit Ethernet Line Card (QGLC)
Table 14: SFP Modules Supported by the QGLC
Module Type
1000Base-SX
1000Base-LX
1000Base-T
This product has been tested and found to comply with the limits for Class 1 laser devices for IEC825,
Important
EN60825, and 21CFR1040 specifications.
The QGLC supports the Star Channel (1 Gbps) for faster FPGA upgrades and is Restriction of Hazardous
Substances (RoHS) 6/6 compliant.
Install QGLCs in chassis slots 17 through 23, 26 through 39, and 42 through 48. Always install these cards
directly behind their respective packet processing cards. They are not required behind any redundant packet
processing cards (those operating in Standby mode).

ASR 5000 Installation Guide

28
Card Interface
Identification Type
Ethernet Fiber, LC
1000 SX duplex
female
connector
Ethernet Fiber, LC
1000 LX duplex
female
connector
Ethernet RJ-45
1000 Copper
ASR 5000 Hardware Platform Overview
Cable Specifications
Fiber Type: Multi-mode fiber (MMF), 850 nm wavelength
Core Size (microns)/Range:
• 62.5/902 feet (275 meters)
• 50/1640 feet (500 meters)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -17 dBm
Fiber Type: Single-mode fiber (SMF), 1310 nm wavelength
Core Size (microns)/Range: 9/32808 feet (10 kilometers)
Minimum Tx Power: -9.5 dBm
Rx Sensitivity: -19 dBm
Operates in full-duplex up to 100 meters of CAT-5 Shielded
Twisted Pair (STP) cable with BER less than 10e-10.